[Robotgroup] GPS unit (was: Restarting in mid-script..)

[Nick Pietraniec]

All of the pieces still exist :)  It might take a little while to put
them all back together.  Maybe someday when I have a little bit of
time :)

I did an RC car with some primitive object avoidance a few years ago
too.  We used sonar sensors to have it take over control when you tried
to run it into a wall.  It didn't work too bad...  That thing is long
gone though.

How are you going to handle power?  I always found that to be a major
pain when dealing with mobile stuff.  Lead acid batteries?




On Tue, 2006-12-12 at 14:53 -0600, Eric Lundquist wrote:
> Nick,
> That sounds like a really cool project!  Does it still exist?  Would
> love to see it!
> 
> A few weeks back, I got inspired to work on a "real" robot.  I had a
> really nice steel frame mobile platform designed by Edwin Wise that
> was sitting around.  People in Houston (SHARP) and Dallas (DPRG) were
> working on a sort of Mini-Robo-Magellen contest in which the robot
> would maneuver to some outdoor GPS waypoints. (
> http://www.robothon.org/robothon/challenge.php )  The goal is that
> perhaps by mid-year I will have something that could reasonably
> navigate with odometry and GPS with some obstacle avoidance thrown in
> to keep it interesting.
> 
> - Eric
> 
> 
> 
> On 12/12/06, Nick Pietraniec <mlists at resistive.net> wrote:
> > I did a project which interfaced a Garmin GPS with a Motorola HC11
> > microcontroller through an RS232 connection and drew a map as you walked
> > on an etch-a-sketch.  It wasn't very accurate, but the code was small
> > since I wrote it in assembly.  Did I miss the email?  What are you guys
> > working on?
> >
> > On Tue, 2006-12-12 at 13:30 -0600, Eric Lundquist wrote:
> > > It's still too early to tell.  So far, I have a bunch of different
> > > microcontrollers and electronics (AVR ATMEGA162, Pololu SSC, RS232
> > > converter, H Bridges, odometry circuit, +5V power regulator, and the
> > > GPS) spread out on my kichen table with the robot under the table up
> > > on blocks and the whole thing barely glued together with a mass of
> > > "don't breath on it too hard" cabling.  Since I haven't moved the
> > > whole works outside yet, I can't get real GPS readings.  Though, I can
> > > state with confidence that the Parallax GPS reliably sends continuous
> > > 0's from my kitchen table. :)  Seriously, I have the code written for
> > > the AVR to process the GPS NMEA input but it is pretty large due to
> > > the inclusion of the C floating point libraries.  I may end having to
> > > rewritie it to get the code size down.
> > >
> > > So far, I have been concentrating on the basic drive mechanisms.  Once
> > > I have that working a little better and all mounted onto the robot
> > > base, I'll be able to then work on integrating real-time GPS data.
> > >
> > > - Eric
> > >
> > > On 12/12/06, Vern Graner <vern at txis.com> wrote:
> > > > Eric Lundquist wrote:
> > > > > Vern has generously loaned me a Parallax GPS unit that has a TTL
> > > > > RS232 interface that I am experimenting with now.
> > > >
> > > > So.. any luck? how well does it work? :)
> > > >
> > > > Vern
> > > >
> > > > --
> > > > Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
> > > > Senior Systems Engineer    | obviously incompetent so why are we
> > > > Texas Information Services | paying you? Of course, if the network
> > > > http://www.txis.com        | is up, then we obviously don't need
> > > > Austin Office 512 328-8947 | you, so why are we paying you?" (c)VLG
> > > > _______________________________________________
> > > > Robotgroup mailing list
> > > > Robotgroup at puremagic.com
> > > > http://lists.puremagic.com/cgi-bin/mailman/listinfo/robotgroup
> > > >
> > > _______________________________________________
> > > Robotgroup mailing list
> > > Robotgroup at puremagic.com
> > > http://lists.puremagic.com/cgi-bin/mailman/listinfo/robotgroup
> > _______________________________________________
> > Robotgroup mailing list
> > Robotgroup at puremagic.com
> > http://lists.puremagic.com/cgi-bin/mailman/listinfo/robotgroup
> >
> _______________________________________________
> Robotgroup mailing list
> Robotgroup at puremagic.com
> http://lists.puremagic.com/cgi-bin/mailman/listinfo/robotgroup