[Robotgroup] Cheap Freescale HC08 development kit

[Evan Harris]

I tried to look at this, but there were two major hurdles to it, first they 
require you to register, then after you jump through that hoop, then they 
require the use of flash, which I refuse to install because of all the 
unstoppable ads that go with it.  Sites like piss me off.

Have you got a link that isn't on eetechbrief?

Evan

On Tue, 14 Nov 2006, Paul Atkinson wrote:

> I mentioned this recently and someone (don't recall whom) suggested I post the link.
> Basically it's the dev kit (compiler, debugger, target board, USB cable, and sample chips) for a new 8-pin HC08 derivative. My interest in it was basically the $10 price and the ability to program and debug some small 8-bit 8-pin parts. They also have some 8 and 6-pin surface mount parts.
>
> They expect you to watch a commercial/video to get the discounted price, but I clicked 'skip it' and still got the reduced price. The compiler is limited to 16K of code, but the parts are limited to 2K flash. It's the RS08KA2 device. The only down-side I saw is the shipping charge was $12 for a $10 kit. (Regular kit price is $49.) You might be able to pick it up from Avnet in town and save shipping.
>
> If you are still interested, here's the link:
> http://www.eetechbrief.com/blast/freescale/index.html
>
> Paul
> _______________________________________________
> Robotgroup mailing list
> Robotgroup at puremagic.com
> http://lists.puremagic.com/cgi-bin/mailman/listinfo/robotgroup