[Robotgroup] BASIC STAMP II EMERGENCY!! (was Robot Head: BS2 Stamp)

[LHudson]

Well there wasn't any magic smoke this time.  It just stopped working...
 
I was doing the Pan and Tilt code that was discussed originally on the thread, and it was working for the most part.  However, there were limitations to the extent of the panning and tilting:  i.e. -- if "650" is 


--- On Wed, 8/6/08, Def Egge <robodigest at innervate.com> wrote:

From: Def Egge <robodigest at innervate.com>
Subject: Re: [Robotgroup] BASIC STAMP II EMERGENCY!! (was Robot Head: BS2 Stamp)
To: "The Robot Group Mailing List" <robotgroup at puremagic.com>
Date: Wednesday, August 6, 2008, 9:19 PM

At 19:55  2008-08-06, you wrote:
-=-=-=-=-= begin quoted message =-=-=-=-=-


[trimmed]


The question is how did you blow yours? So you don't do it again..


[trimmed]


Andre'


[trimmed]


----- Original Message ----- From: "LHudson"
<lhudson73 at yahoo.com>
To: "The Robot Group Mailing List" <robotgroup at puremagic.com>
Sent: Wednesday, August 06, 2008 7:40 PM
Subject: [Robotgroup] BASIC STAMP II EMERGENCY!! (was Robot Head: BS2 
Stamp)


I just blew mine. Does anyone have an extra or unused one that needs 
some robot code to process? If not, can I borrow someone's tomorrow 
so I can do a demo? Otherwise my comptroller / spouse says I have to 
wait until payday, which is Monday, and that would just be sad.


[trimmed]


-=-=-=-=-= end quoted message =-=-=-=-=-

The was one helluva lead-in, Scott.  ;-)

Andre' beat me to the punch.  Figure out what you did to release the 
magic smoke before you have to replace two of them.


-- 

All the best....

Mike

_______________________________________________
Robotgroup mailing list
Robotgroup at puremagic.com
http://lists.puremagic.com/cgi-bin/mailman/listinfo/robotgroup