[Robotgroup] Antec Spot Cool Fan

[brooksdesign]

all I can really tell you is that if you clean them out with a air nossle at 60psi it glows with no wires connected.
-brooks

-----Original Message-----
>From: "thecomers at juno.com" <thecomers at juno.com>
>Sent: Mar 23, 2008 1:34 AM
>To: Robotgroup at puremagic.com
>Subject: [Robotgroup] Antec Spot Cool Fan
>
>I was up at Frys yesterday and picked up an Antec Spot Cool Fan, mainly because it has 3 blue leds and was on sale. I am trying to figure out if it requires 12V or 5V before I open it. The only thing I could find is that it has a 3 pin connector to plug into the fan connector on your motherboard. I found some web pages that say the fan connection on the motherboard can be 12V or 5V. Does anyone have any more info on motherboard fan connectors or this fan? Here is a little more info on the fan.
>
>    *  Quiet and Flexible 3-speed blue LED fan.
>    * Mounts on your motherboard or elsewhere to cool your RAM, expansion cards, etc.
>    * High, Medium, Low fan settings
>          o 22.2CFM/18.2CFM/15.3CFM
>          o 32.7dBA/26.6dBA/23.2dBA
>          o 3000RPM/2500RPM/2000RPM
>    * 212x89x30mm
>    * 94.5grams
>
>Thanks,
>Bob Comer
>_____________________________________________________________
>Click here for free information on starting a business from your home.
>http://thirdpartyoffers.juno.com/TGL2121/fc/REAK6aAWi5VaWausZiISKUWqD9ffSpz6UrdrZ6XiJicHkwsBfkbKzU/
>
>
>
>_______________________________________________
>Robotgroup mailing list
>Robotgroup at puremagic.com
>http://lists.puremagic.com/cgi-bin/mailman/listinfo/robotgroup


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com