[ENet-discuss] ENet - desconnection in 30 seconds after connection.
Nuno Silva
little.coding.fox at gmail.com
Fri Nov 5 08:01:21 PDT 2010
As far as i know ENet isnt thread-safe, so it's probably a bad idea to do
that.
enet_host_service will wait for events, until a certain timeout, or until an
event is triggered. So, if you dont want any lag on your events, you should
limit the timeout to something small like e.g., 25-50, which is very little
compared to 1000.
2010/11/5 Вячеслав Блинников <slavmfm at gmail.com>
> Thank you very much! It works now!
> Is it right calling that function in the separate thread? Like that:
>
> void* ENetHostService(void* client)
> {
> ENetHost* castClient = (ENetHost*)client;
> ENetEvent event;
>
> ENET_HOST_SERVICE:
> enet_host_service(castClient, &event, 1000);
> goto ENET_HOST_SERVICE;
> }
>
> But I think I have some lags in messages sending - what is the point
> in third param to enet_host_service()? Does not this function returns
> (do it's job (message sending in our case)) just in moment when
> enet_peer_send() where called? Or it will wait 1000 milliseconds
> anyway?
>
> So, am I right in the whole structure (calling enet_host_service()
> permanently in different thread) or there are better ways? And is it
> alrignt thet I do not use mutexes when call enet_peer_send()?
>
> 5 ноября 2010 г. 17:10 пользователь Nuno Silva
> <little.coding.fox at gmail.com> написал:
> > Hey there.
> > On your while(true) on the client you must also call enet_host_service in
> > order for the client to keep its connection alive.
> >
> > 2010/11/5 Вячеслав Блинников <slavmfm at gmail.com>
> >>
> >> Hello!
> >>
> >> I wrote the base client accordingly the tutorial and the client which
> >> read inputting through console characters and send it to the server.
> >> Everything is fine but just first 30 seconds - then happen the
> >> disconnection (message "Client information disconnected" shown).
> >> What is wrong with my code?
> >>
> >>
> >>
> >> Server code:
> >>
> >> #include <cstdio>
> >> #include "enet\enet.h"
> >> int main(int argc, int** argv)
> >> {
> >> if (enet_initialize () != 0)
> >> {
> >> printf ("An error occurred while initializing ENet.\n");
> >> goto END;
> >> }
> >> ENetAddress address;
> >> address.host = ENET_HOST_ANY;
> >> address.port = 1234;
> >> ENetHost* server = enet_host_create ( & address, 32, 2, 0, 0);
> >> if (server == NULL)
> >> {
> >> printf("An error occurred while trying to create an ENet
> >> client host.\n");
> >> goto END;
> >> }
> >> ENetEvent event;
> >> WAIT_FOR_AN_EVENT:
> >> enet_host_service(server, &event, 5);
> >> switch (event.type)
> >> {
> >> case ENET_EVENT_TYPE_CONNECT:
> >> printf ("A new client connected from %x:%u.\n",
> event.peer
> >> ->
> >> address.host, event.peer -> address.port);
> >> event.peer -> data = "Client information";
> >> break;
> >>
> >> case ENET_EVENT_TYPE_RECEIVE:
> >> printf ("A packet of length %u was received from %s on
> >> channel %u.
> >> Containings:\n %s", event.packet -> dataLength, event.peer -> data,
> >> event.channelID, event.packet -> data);
> >> enet_packet_destroy (event.packet);
> >> break;
> >>
> >> case ENET_EVENT_TYPE_DISCONNECT:
> >> printf ("%s disconected.\n", event.peer -> data);
> >> event.peer -> data = NULL;
> >> break;
> >>
> >> case ENET_EVENT_TYPE_NONE:
> >> break;
> >> }
> >> goto WAIT_FOR_AN_EVENT;
> >>
> >> printf("host halted.\n");
> >>
> >> END:
> >> getchar();
> >> return 0;
> >> }
> >>
> >>
> >>
> >> Client code:
> >>
> >> #include <cstdio>
> >> #include "enet\enet.h"
> >> #include <vector>
> >> int main(int argc, int** argv)
> >> {
> >> //where reading console data will be stored:
> >> std::vector<char> buffer;
> >>
> >> if (enet_initialize () != 0)
> >> {
> >> printf ("An error occurred while initializing ENet.\n");
> >> goto END;
> >> }
> >> ENetHost* client = enet_host_create ( NULL, 1, 2, 57600 /
> 8,
> >> 14400 / 8);
> >> if(client == 0l)
> >> {
> >> printf("An error occurred while trying to create an ENet
> >> server host.\n");
> >> goto END;
> >> }
> >> ENetAddress address;
> >> enet_address_set_host(&address, "localhost");
> >> address.port = 1234;
> >>
> >> ENetPeer* peer = enet_host_connect(client, &address, 2, 0);
> >> if(peer == 0l)
> >> {
> >> printf("No available peers for initiating an ENet
> >> connection.\n");
> >> goto END;
> >> }
> >>
> >> ENetEvent event;
> >> if (enet_host_service (client, & event, 5000) > 0 && event.type
> ==
> >> ENET_EVENT_TYPE_CONNECT)
> >> {
> >> puts ("Connection to localhost:1234 succeeded.");
> >> }
> >> else
> >> {
> >> enet_peer_reset (peer);
> >>
> >> puts ("Connection to localhost:1234 failed.");
> >> goto END;
> >> }
> >>
> >> printf("Input some data which will be sent to server...\n");
> >>
> >> INPUT_DATA:
> >> buffer.clear();
> >> while(true)
> >> {
> >> char character = getchar();
> >> buffer.push_back(character);
> >> if(character == '\n')
> >> {
> >> break;
> >> }
> >> }
> >> buffer.push_back('\0');
> >>
> >> ENetPacket * packet = enet_packet_create(&buffer[0],
> buffer.size(),
> >> ENET_PACKET_FLAG_RELIABLE);
> >> enet_peer_send (peer, 0, packet);
> >> enet_host_flush(client);
> >> goto INPUT_DATA;
> >>
> >> END:
> >> getchar();
> >>
> >> return 0;
> >> }
> >> _______________________________________________
> >> ENet-discuss mailing list
> >> ENet-discuss at cubik.org
> >> http://lists.cubik.org/mailman/listinfo/enet-discuss
> >
> >
> > _______________________________________________
> > ENet-discuss mailing list
> > ENet-discuss at cubik.org
> > http://lists.cubik.org/mailman/listinfo/enet-discuss
> >
> >
> _______________________________________________
> ENet-discuss mailing list
> ENet-discuss at cubik.org
> http://lists.cubik.org/mailman/listinfo/enet-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.cubik.org/pipermail/enet-discuss/attachments/20101105/071933c3/attachment.html>
More information about the ENet-discuss
mailing list