[Greylist-users] Getting greylisting going on a new Debian
Brian Ross
bross at qualcomm.com
Thu Jun 26 23:05:05 PDT 2008
Yes. That means the information containing the client's IP address
isn't getting passed properly.
I've never seen that before, which brings me back to my earlier
hypothesis that your Sendmail::Milter module was built against a version
of libmilter that isn't fully compatible with the version of sendmail
that you are running. At this point, I suggest that you get the source
for your version of sendmail and build libmilter, then get the source
for Sendmail::Milter and rebuild/reinstall it making sure that you are
linking against the proper version of libmilter.
(We always used locally built sendmail/libmilter/Sendmail::Milter here
and never had any problems)
Regards,
Brian Ross
Steven Jones wrote:
> I have picked this off the console, does it mean anything?
>
> 8><-----
> === 2008-06-27 15:05:21 ===
> Stored Sender: <greylist-users-bounces at lists.puremagic.com>
> Passed Recipient: <thing at thing.dyndns.org>
> Use of uninitialized value in pattern match (m//) at /usr/local/sbin/relaydelay.pl line 589.
> Use of uninitialized value in concatenation (.) or string at /usr/local/sbin/relaydelay.pl line 607.
> Relay: - If_Addr: 202.78.148.43
> Use of uninitialized value in concatenation (.) or string at /usr/local/sbin/relaydelay.pl line 608.
> Use of uninitialized value in concatenation (.) or string at /usr/local/sbin/relaydelay.pl line 608.
> Use of uninitialized value in concatenation (.) or string at /usr/local/sbin/relaydelay.pl line 608.
> Use of uninitialized value in concatenation (.) or string at /usr/local/sbin/relaydelay.pl line 608.
> RelayIP: - RelayName: - RelayIdent: - PossiblyForged:
> From: greylist-users-bounces at lists.puremagic.com - To: thing
> Use of uninitialized value in concatenation (.) or string at /usr/local/sbin/relaydelay.pl line 610.
> InMailer: esmtp - OutMailer: local - QueueID:
> Use of uninitialized value in string eq at /usr/local/sbin/relaydelay.pl line 625.
> Use of uninitialized value in substitution (s///) at /usr/local/sbin/relaydelay.pl line 653.
> Use of uninitialized value in substitution (s///) at /usr/local/sbin/relaydelay.pl line 653.
> Use of uninitialized value in substitution (s///) at /usr/local/sbin/relaydelay.pl line 653.
> Use of uninitialized value in substitution (s///) at /usr/local/sbin/relaydelay.pl line 653.
> Use of uninitialized value in substitution (s///) at /usr/local/sbin/relaydelay.pl line 745.
> Email is known and block has expired. Passing the mail. rowid: 19
> IN EOM CALLBACK - PrivData: 19<greylist-users-bounces at lists.puremagic.com><thing at thing.dyndns.org>
> * Mail successfully processed. Incremented passed count on rowid 19.
> 8><------
>
>
>
> -----Original Message-----
> From: greylist-users-bounces at lists.puremagic.com on behalf of Brian Ross
> Sent: Fri 27/06/2008 13:31
> To: Greylisting Users and Developers Discussion; thing at thing.dyndns.org
> Subject: Re: [Greylist-users] Getting greylisting going on a new Debian
>
> Okay... do a couple of things:
> - make sure that relaydelay.pl is consulting your .conf file
> (double-check the path)
> - set $reverse_mail_tracking=0; in your .conf file
> - if you can, delete everything from the relaytofrom table and
> re-add the whitelist entries for your local subnet(s), be sure to
> include 127.0
> - Run a test again.... please send the complete log of the test
> event including the client connect info, etc... (there is some
> information which sendmail logs before assigning a qid, you can
> correlate by the PID number after sm-mta).
>
> Also please describe the circumstances of your test
> - how are you sending the mail -- is it via the command line on the
> smtp host? are you using a separate client machine?
>
>
>
>
> thing wrote:
>
>> 8><----
>> Jun 27 12:55:23 hermes sm-mta[17649]: m5R0tNJf017649: Milter:
>> to=<thing.thing at gmail.com>, reject=451 4.7.1 Please try again later
>> (TEMPFAIL)
>> Jun 27 12:55:27 hermes sm-mta[17649]: m5R0tNJf017649:
>> from=<thing at thing.dyndns.org>, size=338, class=0, nrcpts=0,
>> proto=ESMTP, daemon=MTA-v4, relay=[192.168.1.108]
>> 8><----
>>
>> | 9 | NULL | <thing at thing.dyndns.org> |
>> <thing.thing at gmail.com> | 2008-06-27 12:55:23 |
>> 2008-07-01 15:54:23 | 2 | 0 | 0 |
>> AUTO | 2008-06-27 12:54:23 | 2008-06-27 12:55:23 |
>> +----+-----------+----------------------------------------------+--------------------------------------+---------------------+---------------------+---------------+--------------+---------------+-------------+---------------------+---------------------+
>>
>> 9 rows in set (0.00 sec)
>>
>> regards
>>
>> Steven
>>
>>
>>
>> Brian Ross wrote:
>>
>>> I just reviewed the code for relaydelay and realized I'd forgotten
>>> about the reverse-whitelist option (which would account for the NULLs
>>> in the relay_ip column). Do you have reverse mail tracking on, or
>>> off ($reverse_mail_tracking) (it defaults to on)?
>>>
>>> I'm thinking that we need more information to help you with this
>>> problem.... if you could more carefully coordinate the log snippets
>>> that you're sending with the relaytofrom table information, we might
>>> be able to provide better ideas.
>>>
>>> -Brian
>>>
>>>
>>> thing wrote:
>>>
>>>> Brian Ross wrote:
>>>>
>>>>> The NULLs in relay_ip column don't look right to me at all....
>>>>> There should always be a value for relay_ip. How did you get the
>>>>> Sendmail::Milter perl module? Did you build it yourself? Do you
>>>>> know if it's linked to the proper version of libmilter for your
>>>>> version of sendmail?
>>>>>
>>>> I have no idea, its all in the Debian package system.
>>>>
>>>> What are the dependancies?
>>>>
>>>> I will go digging through the apt-cache, see if something is missing.
>>>>
>>>> hmmmm,
>>>>
>>>> I have just installed this,
>>>>
>>>> libmail-milter-perl - Perl extension modules for mail filtering via
>>>> milter
>>>>
>>>> ?
>>>>
>>>> Will test.
>>>>
>>>> Nope failed....
>>>>
>>>> This is what's installed.
>>>>
>>>> 8><---------
>>>> hermes:/etc/mail# apt-get install libmilter0
>>>> Reading package lists... Done
>>>> Building dependency tree... Done
>>>> libmilter0 is already the newest version.
>>>> 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
>>>> hermes:/etc/mail#
>>>> hermes:/etc/mail# apt-get install libsendmail-pmilter-perl
>>>> Reading package lists... Done
>>>> Building dependency tree... Done
>>>> libsendmail-pmilter-perl is already the newest version.
>>>> 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
>>>> 8><--------
>>>>
>>>>
>>>>> Could you send the complete log entries for this qid: m5QMW4RO016829 ?
>>>>>
>>>>>
>>>> 8><-----------
>>>> hermes:/var/log# grep m5QMW4RO016829 mail.log
>>>> Jun 27 10:32:05 hermes sm-mta[16829]: m5QMW4RO016829: Milter:
>>>> to=<steven.jones at vuw.ac.nz>, reject=451 4.7.1 Please try again later
>>>> (TEMPFAIL)
>>>> Jun 27 10:32:07 hermes sm-mta[16829]: m5QMW4RO016829:
>>>> from=<thing at thing.dyndns.org>, size=339, class=0, nrcpts=0,
>>>> proto=ESMTP, daemon=MTA-v4, relay=[192.168.1.108]
>>>> 8><-----------
>>>>
>>>>
>>>>
>>>>
>>>>> thing wrote:
>>>>>
>>>>>> from the database.
>>>>>>
>>>>>> mysql> select * from relaytofrom;
>>>>>> +----+-----------+----------------------------------------------+--------------------------------------+---------------------+---------------------+---------------+--------------+---------------+-------------+---------------------+---------------------+
>>>>>>
>>>>>> | id | relay_ip | mail_from |
>>>>>> rcpt_to | block_expires |
>>>>>> record_expires | blocked_count | passed_count | aborted_count
>>>>>> | origin_type | create_time | last_update |
>>>>>> +----+-----------+----------------------------------------------+--------------------------------------+---------------------+---------------------+---------------+--------------+---------------+-------------+---------------------+---------------------+
>>>>>>
>>>>>> | 1 | 192.168.1 | NULL |
>>>>>> NULL | 0000-00-00 00:00:00 |
>>>>>> 9999-12-31 23:59:59 | 0 | 0 | 0
>>>>>> | MANUAL | 2008-06-27 09:41:17 | 2008-06-27 09:41:17 |
>>>>>> | 2 | 127.0.0.1 | NULL |
>>>>>> NULL | 0000-00-00 00:00:00 |
>>>>>> 9999-12-31 23:59:59 | 0 | 0 | 0
>>>>>> | MANUAL | 2008-06-27 09:41:25 | 2008-06-27 09:41:25 |
>>>>>> | 3 | NULL | <greylist-users-bounces at lists.puremagic.com> |
>>>>>> <thing at thing.dyndns.org> | 2008-06-27 09:43:41 |
>>>>>> 2008-08-02 10:50:16 | 1 | 6 | 0
>>>>>> | AUTO | 2008-06-27 09:42:41 | 2008-06-27 10:50:16 |
>>>>>> | 4 | NULL | <thing at thing.dyndns.org> |
>>>>>> <phoebe.gray at paradise.net.nz> | 2008-06-27 09:43:47 |
>>>>>> 2008-08-02 09:43:50 | 3 | 1 | 0
>>>>>> | AUTO | 2008-06-27 09:42:47 | 2008-06-27 09:43:50 |
>>>>>> | 5 | NULL | <thing at thing.dyndns.org> |
>>>>>> <ssj at vuw.ac.nz> | 2008-06-27 09:49:07 |
>>>>>> 2008-08-02 10:31:36 | 4 | 2 | 0
>>>>>> | AUTO | 2008-06-27 09:48:07 | 2008-06-27 10:31:36 |
>>>>>> | 6 | NULL | <thing at thing.dyndns.org> |
>>>>>> <steven.jones at vuw.ac.nz> | 2008-06-27 10:33:05 |
>>>>>> 2008-07-01 13:32:05 | 1 | 0 | 0
>>>>>> | AUTO | 2008-06-27 10:32:05 | 2008-06-27 10:32:05 |
>>>>>> | 7 | NULL | <thing at thing.dyndns.org> |
>>>>>> <greylist-users at lists.puremagic.com> | 2008-06-27 10:38:42 |
>>>>>> 2008-08-02 10:40:26 | 1 | 1 | 0
>>>>>> | AUTO | 2008-06-27 10:37:42 | 2008-06-27 10:40:26 |
>>>>>> +----+-----------+----------------------------------------------+--------------------------------------+---------------------+---------------------+---------------+--------------+---------------+-------------+---------------------+---------------------+
>>>>>>
>>>>>> 7 rows in set (0.00 sec)
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Greylist-users mailing list
>>>>>> Greylist-users at lists.puremagic.com
>>>>>> http://lists.puremagic.com/cgi-bin/mailman/listinfo/greylist-users
>>>>>>
>>>> _______________________________________________
>>>> Greylist-users mailing list
>>>> Greylist-users at lists.puremagic.com
>>>> http://lists.puremagic.com/cgi-bin/mailman/listinfo/greylist-users
>>>>
>>> _______________________________________________
>>> Greylist-users mailing list
>>> Greylist-users at lists.puremagic.com
>>> http://lists.puremagic.com/cgi-bin/mailman/listinfo/greylist-users
>>>
>> _______________________________________________
>> Greylist-users mailing list
>> Greylist-users at lists.puremagic.com
>> http://lists.puremagic.com/cgi-bin/mailman/listinfo/greylist-users
>>
> _______________________________________________
> Greylist-users mailing list
> Greylist-users at lists.puremagic.com
> http://lists.puremagic.com/cgi-bin/mailman/listinfo/greylist-users
>
> _______________________________________________
> Greylist-users mailing list
> Greylist-users at lists.puremagic.com
> http://lists.puremagic.com/cgi-bin/mailman/listinfo/greylist-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puremagic.com/pipermail/greylist-users/attachments/20080626/f9dc9b3c/attachment-0001.htm>
More information about the Greylist-users
mailing list